Cariitti Standard Glass Fiber Sauna Light Set – 6 Spots

Cariitti Standard Glass Fiber Sauna Light Set – 6 Spots

Illuminate your sauna with the Cariitti Standard Glass Fiber Sauna Light Set, featuring a VPL10 1W LED projector. This energy-efficient, long-lasting projector is completely silent and produces minimal heat, making it perfect for sauna lighting. The set is ideal for small saunas up to 2 sq.m.

Key Features:

  • Versatile Installation: Install the glass fiber lighting on your sauna’s ceiling or benches. Available in two sizes: 6 or 16 spots.
  • Aesthetic Lighting: Creates a warm light halo that highlights the natural beauty of your sauna materials.
  • Heater Illumination: Includes a heater lens to illuminate your sauna heater, enhancing the löyly experience.

Advantages of Glass Fiber Lighting:

  • High-Temperature Resistance: Glass fiber withstands temperatures up to +356F (180C), essential for sauna use.
  • Safety and Durability: There is no electricity in the fibers; they only emit light. There are no electronics in the fibers, and they have no wearing parts, which means they last indefinitely or at least until your next renovation. They can even be reused.
  • Low Maintenance: Glass fiber lights are practically maintenance free, the only maintenance point is the projector, which has a service life of 50 000 h.
  • Cost-Effective: When comparing with LED strips, it is important to pay attention not only to the purchase price, but to the maintenance costs as well.

Specifications:

  • Projector: VPL10 US – E511
  • Power: 120VAC, 60Hz, 0.03A, 2.2W, Class IP55
  • Light Output: 95lm, 1W, 3000K / Ra >85
  • Fiber Measures: S-Flex 1.5: 5pcs x 8.2ft, S-Flex 2: 1pc x 14.8ft
  • Certification: UL153 | CSA C22.2
  • Installation: Projector to be installed outside or under the sauna bench (if hardwired to the main supply), max 2.3 ft from the floor.

5 Year Warranty: Cariitti lighting sets come with a 5-year warranty, excluding incorrect installation or use.

Light switch not included. We recommend using a regular light switch with a dimmer for your sauna light set, such as: Leviton switch 5655-2W or Zooz Momentary Push-Button in-Wall Switch ZAC99 from Amazon.

NOTE: GLASS FIBER CANNOT BE CUT AT THE INSTALLATION SITE, NO SHARP 90° BENDING OR NAILING.

Disclaimer: Bsaunas Inc. is not responsible for ANY electrical work; this portion of the job needs to be completed by a licensed electrician.

$652.00

View cart
TECHNICAL SPECIFICATIONS
STANDARD 6 (5+1) SPOT SET
Suitable for lighting a sauna of max 21 sq.ft.
PROJECTOR SPECIFICATIONS LIGHTS FIBER MEASURES
  • Type: VPL10 US – E511
  • 120VAC, 60Hz, 0.03A, 2.2W, Class IP55*
  • Equipped with a power cord
  • Certified: UL153 | CSA C22.2
  • Projector to be installed outside of the sauna or underneath the sauna bench** max 2.3 ft from the floor
  • 5 spots (for bench or ceiling)
  • 1 spot for the heater lens (to be installed above the heater)
  • Dimmable 3000K / Ra >85
  • Output: 95lm, 1W
  • S-Flex 1.5: 5pcs x 8.2ft
  • S-Flex 2: 1pc x 14.8ft
  • Diameter of fiber 1.5mm

* IP55 rating means the enclosure is dust-protected and protected against water jets from any direction.

** If the electrician removes the plug and connects the projector directly to the main supply, it can be installed inside the sauna, on the wall under the benches. Since electrical outlets are not permitted inside the sauna, the projector must be wired directly to the main supply. This placement is crucial because heat rises in the sauna, so positioning the projector lower ensures it won’t be affected by the heat.

 

Get a Free Quote

Days
Hours
Minutes
Seconds
Days
Hours
Minutes
Seconds

SALE ENDS IN

Days
Hours
Minutes
Seconds
Sorry, the sale has ended!